Wireless AP/Bridge/Client
TIAP700-R1GTH3F
Wi-Fi 6 Industrial Wireless AP
Front view
Side view
Side view
Label view
Back view
Features and Benefits
Wi-Fi 6 Industrial Wireless AP- Supports one Gigabit PoE WAN/LAN Ethernet port
Built-in antenna, supports ceiling mount- Supports MESH self-organizing network
Supports 802.11ax, with access rate up to 3000 Mbps- Supports one DC power port
- Supports Chinese SSID
Overview
TIAP700-R1GTH3F is a Transcend high-performance indoor ceiling-mount wireless access point, equipped with a high-performance chipset solution, supporting 802.11ax Wi-Fi 6 protocol with a maximum throughput of up to 3000 Mbps. The device supports high-density multi-user concurrent access, smoothly handling HD video, voice transmission, and wireless positioning services. With a clean and aesthetic deployment design, it is suitable for indoor scenarios such as smart cities, campuses, offices, shopping malls, supermarkets, and hotels, delivering high-speed, stable, and high-quality Wi-Fi access services.
Technical Parameters
| Hardware | |
|---|---|
| Weight | 1Kg |
| Dimensions | 200 (L) x 200 (W) x 30 (D) mm |
| Spatial Streams | 4 |
| SSID Count (VAP) | Max.16 |
| Max. Concurrent Users | ≤256 |
| Max. Transmission Rate | 3000Mb |
| Ethernet Port | 1 x GE, PoE Supported |
| Antenna | Built-in Antenna |
| Operating Frequency Band | 802.11ax/ac/n/a: 5.725 GHz-5.850 GHz; 5.15-5.35 GHz (China) | 802.11ax/n/g/b: 2.4 GHz-2.4835 GHz (China) |
| Modulation | OFDM: BPSK@6/9 Mbps, QPSK@12/18 Mbps, 16 - QAM@24 Mbps, 64 - QAM@48/54 Mbps DSSS : DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps MIMO-OFDM (11n): MCS 0-15 MIMO-OFDM (11ac): MCS 0-9 |
| Receiver Sensitivity | 802.11n (2.4 GHz) / 802.11g / 802.11b |
| Receiver Sensitivity | -95 dBm @ MCS0 / -95 dBm @ 6 Mbps / -98 dBm @ 1 Mbps |
| Receiver Sensitivity | -76 dBm @ MCS7 / -79 dBm @ 54 Mbps / -94 dBm @ 11 Mbps |
| Receiver Sensitivity | -95 dBm @ MCS8 |
| Receiver Sensitivity | -76 dBm @ MCS15 |
| Transmit Power | 27 dBm |
| Adjustable Power Granularity | 1 dBm |
| Operating Temperature / Storage Temperature | -10 C to 45 C / -40 C to 70 C |
| Operating Humidity / Storage Humidity | 10%-90% RH (non-condensing) / 5%-90% RH (non-condensing) |
| Power Supply | PoE 802.3af/at or DC 12 V 1.5 A |
| Wattage | <= 25 W |
| Ingress Protection (IP) Rating | IP40 |
| Reset/Factory Reset | Soft Reset |
| Software | |
| Max. Access Terminals | <= 256 |
| Recommended Access Terminals | < 128 |
| Virtual AP | <= 16 |
| SSID Hidden | Supported |
| SSID Independent Authentication | Supported |
| Open System/Shared Key | Supported |
| WPA, WPA2, Pre-RSNA Mixed Access | Supported |
| VLAN Segmentation | Supported |
| WDS Bridge Mode | Supported |
| Load Balancing | Supported |
| User Limit | Supported |
| Bandwidth Limit | Supported |
| 5G Priority | Supported |
| Short GI in 20 MHz, 40 MHz, and 80 MHz Modes | Supported |
| Auto/Manual Rate Adjustment (Default: Auto) | Supported |
| Independent SSID Hiding per SSID, Chinese SSID Support | Supported |
| CAPWAP Tunnel in Fit AP Mode | Supported |
| Auto AP Onboarding in Fit AP and Cloud AP Modes | Supported |
| VLAN Assignment by Access SSID | Supported |
| Uplink VLAN Trunk | Supported |
| VLAN ID (1-4094), Configurable VAP per Radio | Supported |
| DHCP Client (Obtain IP via DHCP) | Supported |
| Access Control (ACL) | Supported |
| Unified AC Authentication in Fit AP Mode | Supported |
| Others | Supported |
| Others | Supported |
| Standards and Certifications | |
| System Certifications | ISO 9001, ISO 14001, ISO 22163 (IRIS) |
| MTBF | > 250,000 Hour |
Resources
Ordering Information
| Model | Description |
|---|---|
| TIAP700-R1GTH3F | 2.4 & 5 GHz dual-band, IEEE 802.11ax Industrial Wireless AP, 1-27 dBm, 1 x Gigabit Ethernet port (PoE input supported), IP40 Ingress Protection (IP) Rating |