Trusted in Industrial Communication for 20+ YearsIndustrial networking products for harsh, mission-critical environments
WIFI Ethernet Switch

TIAP700-D4GF6GT-D2

Wi-Fi 6 Gigabit Intrinsically Safe Managed Industrial Switch

Features and Benefits
  • Gigabit ConnectivitySupports 4 Gigabit SFP slots
  • Gigabit ConnectivitySupports 6 x 10/100/1000 Base-T(X) Ports (RJ45 Connector)
  • Relay AlarmSupports Layer 2 management
  • Relay AlarmSupports non-blocking full-Gigabit switching
  • DIP SwitchSupports 802.11ax, with access rate up to 3000 Mbps
  • DIP SwitchExternal MMCX RF ports for flexible antenna configuration
  • DIP SwitchSupports MESH self-organizing network
  • DIP SwitchSupports Chinese SSID
Overview

TIAP700-D4GF6GT-D2 is a Transcend Wi-Fi 6 DIN-Rail managed Layer 2 Gigabit switch designed for harsh industrial environments, supporting 2.4G/5G dual-band wireless transmission with up to 3000 Mbps throughput to meet high-bandwidth, high-density industrial networking requirements. The device features a DIN-Rail enclosure design suitable for space-constrained industrial installations. It is equipped with 4 SMA RF interfaces, 4 Gigabit/Fast Ethernet SFP optical ports, and 6 Gigabit Ethernet ports, delivering rich and flexible connectivity. With multi-mode O&M support and comprehensive Layer 2 management features including VLAN, LACP, and QoS, along with wide-voltage redundant power input, overcurrent protection, and reverse-polarity protection, the device ensures 24/7 stable operation, making it ideal for mining, tunneling, and other hazardous industrial networking scenarios.

Technical Parameters
Standards Compliance
Standards IEEE 802.3i(10Base-T)
IEEE 802.3u(100Base-TX)
IEEE 802.3ab(1000Base-T)
IEEE 802.3z(1000Base-SX/LX)
IEEE 802.3ad (Port Aggregation)
IEEE 802.3x (Flow Control)
IEEE 802.1p (Priority)
IEEE 802.1Q (VLAN)
IEEE 802.1d (STP)
IEEE 802.1w (RSTP)
IIEEE 802.11ax
Switching
Switching Characteristics Store-and-Forward
Switching Capacity 24 Gbps
Packet Forwarding Rate 17.856 Mpps
Cache Capacity 4 Mbit
MAC Address Table 8 K
Switching delay < 10 µs
Port Performance
Electrical Port 6 x 10/100/1000Base-TX ports, auto-negotiation, full/half-duplex, MDI/MDI-X auto-detection
Optical Port 4 x Gigabit/Fast Ethernet SFP optical port slots
Management Port 1 x Console management port (RS-232), RJ45
LED Indicators System LED, Power LED, Port LEDs
Wireless Features
Spatial Streams 4
SSID Count (VAP) Max. 16
Max. Concurrent Users ≤ 256
Max. Transmission Rate 3000 Mbps
Antenna 4 x MMCX connectors
Operating Frequency Band 802.11ax/ac/n/a: 5.725-5.850 GHz; 5.15-5.35 GHz (China) 802.11b/g/n: 2.4-2.483 GHz (China)
Modulation OFDM: BPSK@6/9 Mbps, QPSK@12/18 Mbps, 16 - QAM@24 Mbps, 64 - QAM@48/54 Mbps DSSS: DBPSK@1 Mbps, DQPSK@2 Mbps, CCK@5.5/11 Mbps MIMO-OFDM
DSSS : DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps MIMO-OFDM (11n): MCS 0-15
MIMO-OFDM (11ac): MCS 0-9
Receiver Sensitivity 802.11n (2.4 GHz) / 802.11g / 802.11b -95 dBm @ MCS0 / -95 dBm @ 6 Mbps / -98 dBm @ 1 Mbps -76 dBm @ MCS7 / -79 dBm @ 54 Mbps / -94 dBm @ 11 Mbps
-95dBm @ MCS0 / - 95dBm @ 6Mbps / - 98dBm @ 1Mbps
-76dBm @ MCS7 / - 79dBm @ 54Mbps / - 94dBm @ 11Mbps
-95dBm @ MCS8
-76dBm @ MCS15
Transmit Power 30 dBm
Switching Features
VLAN Supports Port-based VLAN Supports IEEE 802.1Q VLAN Supports Private VLAN Supports Protocol VLAN
Reliability Supports STP, RSTP Supports LACP Load Balancing Supports RLINK and MLINK Supports G.8032 ERPS Supports Loopback Detection
Security Supports port rate limiting Supports bps and pps storm control
Multicast Supports IGMP v1 / v2 Snooping, IGMP Fast Leave Supports Multicast VLAN
QoS Supports ACL-based flow, VLAN ID, COS, TOS, DSCP Supports single-rate single-bucket dual-color Supports DSCP, COS / 802.1p priority, TOS field rewriting Supports 8 queues per port Supports SP, WRR queue scheduling algorithms Supports IP fragment matching
ACL Supports IP ACL, matching by source/destination IP, IP protocol type, IP priority, TCP/UDP source/destination port Supports MAC ACL, matching by source/destination MAC, VLAN ID, COS Supports IP+MAC combined ACL Supports custom ACL Supports ACL based on root guard
Management Supports CLI Supports IPv4 HTTP Supports IPv4 FTP/TFTP Supports IPv4 SNTP/NTP Supports IPv4 SSH Supports IPv4 Syslog Supports SNMPv1 / v2c/v3 Supports MIB interface, Supports Trap Supports dual IMG Supports LLDP
Mechanical
Dimensions 201 mm x 153 mm x 44 mm
Weight 1.13 kg
Mounting Embedded (DIN-Rail)
Electrical
Input Voltage 2 x 9-24 VDC power inputs, overload and reverse-polarity protection, 6-pin 5.08 mm pitch terminal block
Wattage < 24 W
Operating Environment
Operating Temperature -40 °C to 75 °C
Storage Temperature -40 °C to 85 °C
Relative Humidity 5%-95% RH (non-condensing)
Standards and Certifications
System Certifications ISO 9001, ISO 14001, ISO 22163 (IRIS)
MTBF > 500,000 hours
Resources
Name Version Release Date Download
Datasheet for TIAP700-D4GF6GT-D2 269.4 KB
V1.0 Aug 25, 2026
Ordering Information
ModelDescription
TIAP700-D4GF6GT-D2 DIN-Rail Intrinsically Safe Industrial Managed Wi-Fi 6 Dual-Band Wireless Switch, supports 4 x Gigabit SFP slots, 6 x 10/100/1000 Base-T(X) Ports (RJ45 Connector), 9–24 VDC power input, IP30 Ingress Protection (IP) Rating

Ready to get started?

Have a question about purchasing a solution that you are interested in? Fill in the form and we'll respond in 1 working day.

+86 400 898 3720
Expert customer service on call. 24/7 Phone Support
Email
Get advice, answers, and solutions when you need them. For general questions, email us at info@transcendcom.com
  • Customized Service

    Tailored solutions to meet your specific needs, including OEM/ODM services and bulk sale support.

  • Full Support & Service

    Experienced R&D team, making up 39% of our workforce. Assist with installation, configuration, and troubleshooting.

0/5000