Protocol Gateways
IPG27-D4T-D2
2-Port Profinet to EtherNet/IP Protocol Gateway
Front view
Features and Benefits
Supports 2 x 10/100 Mbit/s EtherNet/IP RJ45 interfaces- Supports 2 x 10/100 Mbit/s Profinet RJ45 interfaces
Millisecond-level protocol conversion time- Complies with standard EtherNet/IP and PROFINET-IO protocols
Graphical configuration, no programming required
Overview
The IPG27-D4T-D2 is an easy-to-configure and powerful gateway that connects EtherNet/IP devices and networks to PROFINET network systems. The gateway enables bidirectional data exchange, allowing existing low-cost EtherNet/IP devices to be integrated into PROFINET network systems while also providing data from PROFINET to EtherNet/IP devices. This device has been maturely applied in industrial scenarios supporting EtherNet/IP interfaces, such as frequency converters, servo drives, intelligent field measurement devices, instruments, PLCs, DCS and FCS.
Technical Parameters
| PROFINET | |
| PROFINET Mode | PROFINET I/O Slave |
| PROFINET Specification | V2.43 |
| GSDML Specification | V2.33 |
| PROFINET Interface | 2 x 100 Mbit/s Ethernet, 2 x RJ45 connectors |
| Slot | Supports 16 slots |
| MRP | Supported |
| Max. Data Size | 1440bytes IN+1440bytes OUT |
| Switch | Integrated dual-port switch |
| Acyclic Read/Write | Supports acyclic RECORD read/write |
| Ethernet Packet Monitoring | Supported |
| Modbus Packet Monitoring | Supported |
| Protocol Conversion Time | <2ms |
| EtherNET/IP | |
| CIP & EIP Specification | Edition3.1&Edition1.24 |
| EDS | Supported |
| EtherNet/IP Interface | 2 x 10/100 Mbit/s Ethernet, RJ45 plugs |
| Max. Data Size | 500bytes IN+500bytes OUT |
| DLR | Supported |
| Switch | Integrated dual-port switch |
| Ethernet Packet Monitoring | Supported |
| Modbus Packet Monitoring | Supported |
| Protocol Conversion Time | <2ms |
| Configuration Tool | |
|---|---|
| Configuration Interface | Ethernet interface |
| Project Management | Supports save and load |
| Language | Supports Chinese/English switching |
| Data Mapping | Supports mapping configuration between EtherNet/IP data and PROFINET-IO |
| Electrical Performance | |
| Power | 24VDC (-15% ~ +20%) 60mA@24VDC |
| Isolation | Triple isolation: Ethernet <=> power <=> Ethernet |
| Protection | Reverse voltage/short-circuit protection |
| Operating Temperature | -20℃ / +70℃ |
| Storage Temperature | -40℃ / +85℃ |
| Relative Humidity | 10 - 95% non-condensing |
| Mechanical | |
| Ingress Protection (IP) Rating | IP20 |
| Enclosure Material | Iron |
| Enclosure Dimensions (Net W x H x D) | 34x 110 x 74 mm |
| Weight | Approx. 330g |
| Mounting | DIN 35mm rail mounting |
| MTBF | MTBF greater than 500,000 hours |
Resources
Ordering Information
| Model | Description |
|---|---|
| IPG27-D4T-D2 | DIN-Rail Profinet to EtherNet/IP protocol gateway, 2 x 100M EtherNet/IP electrical ports to 2 x 100M Profinet electrical ports, 24VDC power input |