Protocol Gateways
IPG23-D4T-D2
2-Port PROFINET to MODBUS TCP Gateway
Front view
Port side
DIN-rail
Back view
Power input
Features and Benefits
Supports 2 x 10/100 Mbit/s MODBUS TCP RJ45 interfaces- Supports 2 x 10/100 Mbit/s Profinet RJ45 interfaces
Millisecond-level protocol conversion time- Complies with standard PROFINET-IO and Modbus protocol specifications
Complies with standard PROFINET-IO and Modbus protocol specificationsFeaturesFeatures- Graphical configuration, no programming required
- Supports Modbus device point table import and export
- Configuration software can monitor and record Modbus network data online
Overview
The IPG23-D4T-D2 is an easy-to-configure, high-performance protocol conversion gateway used to connect Modbus TCP networks to PROFINET systems, supporting bidirectional data exchange to achieve interoperability between the two types of devices. On the PROFINET side, the gateway acts as a PROFINET-IO device, transferring data through slots and subslots, with the bundled GSDML file available for master station configuration; on the Modbus side, client/server mode can be switched, and the configuration software is used to establish data mapping between the two sides for cross-protocol data forwarding.
Technical Parameters
| PROFINET | |
| PROFINET Mode | PROFINET I/O Slave |
| PROFINET Specification | V2.43 |
| GSDML Specification | V2.33 |
| PROFINET Interface | 2 x 100 Mbit/s Ethernet (RJ45 connectors) |
| Slot | Supports 16 slots |
| MRP | Supported |
| Max. Data Size | 1440bytes IN+1440bytes OUT |
| Switch | Integrated dual-port switch |
| Acyclic Read/Write | Supports acyclic RECORD read/write |
| IRT | Supported |
| FSU | Supported |
| Protocol Conversion Time | <15ms |
| Modbus | |
|---|---|
| Modbus Specification | V1.1b3 |
| Modbus TCP Specification | V1.0b Client/Server |
| Ethernet interface | 2 x RJ45 |
| Node Scale | Client can connect to 16 Modbus TCP Server devices, each device can be configured with 32 Modbus commands; Server supports 10 Modbus TCP Client devices connecting simultaneously. |
| Transformer Isolation | Supported |
| Supported Rates | 10/100M full duplex |
| Mode | Client/Server selectable |
| Parity | CRC |
| Function Codes | Function codes 01H, 02H, 03H, 04H, 05H, 06H, 0FH, 10H |
| Configuration Tool | |
| Configuration Interface | Ethernet interface |
| Project Management | Supports save and load |
| Language | Supports Chinese/English |
| Monitoring | Supports Modbus packet monitoring |
| Modbus Point Table | Supports Modbus point table import and export |
| Data Mapping | Supports mapping configuration between Modbus and PROFINET-IO |
| Electrical Performance | |
| Power | 24VDC (-15% ~ +20%) 130mA@24VDC |
| Isolation | Triple isolation: Ethernet <=> power <=> Ethernet |
| Protection | Reverse voltage/short-circuit protection |
| Operating Temperature | -20℃ ~ +70℃ |
| Storage Temperature | -40℃ ~ +85℃ |
| Relative Humidity | 10 - 95% non-condensing |
| Mechanical | |
| Ingress Protection (IP) Rating | IP20 |
| Enclosure Material | Iron |
| Enclosure Dimensions (Net W x H x D) | 34x 110 x 74 mm |
| Weight | Approx. 330g |
| Mounting | DIN 35mm rail mounting |
| MTBF | MTBF greater than 500,000 hours |
Resources
Ordering Information
| Model | Description |
|---|---|
| IPG23-D4T-D2 | DIN-Rail PROFINET to MODBUS TCP protocol gateway, 2 x MODBUS TCP ports to 2 x 100M Profinet electrical ports, 24VDC power input |