Layer 2 Smart Managed Industrial Ethernet Switch
Carat55-D4GF8GTIP-D3
12-Port DIN-Rail Layer 2 PROFINET Industrial Switch
Front view
Side view
Side view
Label view
Back view
Top view
Features and Benefits
4 x gigabit SFP slots, 8 x 10/100/1000 Base-T(X) Ports (RJ45 Connector)- Supports PROFINET, EtherNet/IP and Modbus TCP
Supports 18~72VDC redundant power input, relay alarm output- High-strength aluminum alloy sealed housing,rugged and durable
Industrial fanless dust-proof design, suitable for long-term operation- Supports AutoSniffer device management software
Overview
Carat55-D4GF8GTIP-D3 is a managed DIN-Rail Layer 2 PROFINET industrial Ethernet switch purpose-built for network communications in railway systems and industrial automation. Designed for harsh operating environments, it delivers highly-reliable industrial network connectivity for diverse field-application sites.
Adopting store-and-forward switching mode, the unit offers 8×10/100/1000 Base-T(X) RJ45 copper ports and 4×Gigabit SFP slots. It provides non-blocking wire-speed 1000 M forwarding and supports IEEE 802.3x full-duplex flow control plus back-pressure flow control for half-duplex operation.It supports CLI, Telnet, SNMP, SSH and Web-based network management, alongside Layer 2 switching features including VLAN, IGMP Snooping, Port Trunking, Port Security, Port Mirroring, and QoS.
Technical Parameters
| Standard Compliance | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standards | IEEE 802.3i(10Base-T) IEEE 802.3u(100Base-TX) IEEE 802.3ab(1000Base-T) IEEE 802.3ad (Link Aggregation) IEEE 802.3z(1000Base-SX/LX) IEEE 802.3x (Flow Control) IEEE 802.1p (Priority) IEEE 802.1Q(VLAN) IEEE 802.1d(STP) IEEE 802.1w(RSTP) IEEE 802.1s(MSTP) | ||||||||||||||||
| Switching Properties | |||||||||||||||||
| Switching Characteristics | Store and Forward | ||||||||||||||||
| Switching Capacity | 56Gbps | ||||||||||||||||
| Packet Forwarding Rate | 17.86Mpps | ||||||||||||||||
| Cache Capacity | 12Mbit | ||||||||||||||||
| MAC Address Table | 16K | ||||||||||||||||
| Switching delay | <10μs | ||||||||||||||||
| Port Performance | |||||||||||||||||
| electrical port | 8 x 10/100/1000 Base-T(X) ports, RJ45, auto flow control, full/half duplex mode, MDI/MDI-X adaptive | ||||||||||||||||
| Optical Port | 4 x gigabit SFP slots, LC | ||||||||||||||||
| Management Port | 1 x Console port (RS-232), RJ45 | ||||||||||||||||
| LED Indicators | System (SYS), Power (P1, P2), Port (Link/ACT) | ||||||||||||||||
| Key Features | |||||||||||||||||
| Industrial Protocol | PROFINET, EtherNet/IP, Modbus TCP | ||||||||||||||||
| VLAN Features | Supports IEEE 802.1Q VLAN | ||||||||||||||||
| Reliability | Supports STP, RSTP, MSTP, MRP Supports LACP load balancing Supports G.8032 ERPS ring protocol Supports loopback detection | ||||||||||||||||
| Security | Supports port rate limiting Supports storm control | ||||||||||||||||
| Multicast | Supports IGMP v1 / v2 / v3 snooping, IGMP Fast leave | ||||||||||||||||
| QoS | Supports ACL-based flow, VLAN ID, CoS, DSCP Supports DSCP, CoS / 802.1p priority, Supports 8 queues per port Supports SP, WRR queue scheduling | ||||||||||||||||
| ACL | Supports IP ACL based on source/destination IP, IP protocol type, IP precedence, TCP/UDP source and destination port numbers Supports MAC ACL based on source/destination MAC, VLAN ID, CoS Supports IP+MAC combined ACL | ||||||||||||||||
| Management and Maintenance | Supports CLI Supports IPv4 HTTP Supports IPv4 FTP/TFTP Supports IPv4 SNTP/NTP Supports IPv4 SSH Supports IPv4 Syslog Supports SNMPv1 / v2c/v3 Supports MIB interface, Trap Supports dual image Supports LLDP | ||||||||||||||||
| Mechanical | |||||||||||||||||
| Dimensions | 77mm x 140mm x 187mm (W x D x H) | ||||||||||||||||
| Weight | 1.58kg | ||||||||||||||||
| Mounting | DIN-Rail, optional wall-mount | ||||||||||||||||
| Other | IP40 protection, corrugated high-strength aluminum enclosure | ||||||||||||||||
| Electrical Performance | |||||||||||||||||
| Input Voltage | 24VDC (18 ~ 72VDC) redundant power input, overload and reverse polarity protection, 6-pin 5.08mm pitch terminal block (relay occupies 2 pins) | ||||||||||||||||
| Alarm Port | 1-channel relay alarm output, terminal block | ||||||||||||||||
| Wattage | <23W | ||||||||||||||||
| Operating Environment | |||||||||||||||||
| Operating Temperature | -40℃ ~ 75℃ | ||||||||||||||||
| Storage Temperature | -40℃ ~ 85℃ | ||||||||||||||||
| Relative Humidity | 5% ~ 95% (non-condensing) | ||||||||||||||||
| Standards and Certifications | |||||||||||||||||
| System Certification | ISO9001, ISO14001, ISO22163(IRIS) | ||||||||||||||||
| Standards Certification | CE,FCC | ||||||||||||||||
| Safety | Compliant with EN60950 | ||||||||||||||||
| EMC |
| ||||||||||||||||
| Vibration | Compliant with IEC 60068-2-6 | ||||||||||||||||
| Shock | Compliant with IEC 60068-2-27 | ||||||||||||||||
| Free Fall | Compliant with IEC 60068-2-32 | ||||||||||||||||
| MTBF | MTBF > 300,000 hours | ||||||||||||||||
Resources
Ordering Information
| Model | Description |
|---|---|
| Carat55-D2GF8GTIP-D3 | *Industrial DIN-rail L2 managed Profinet Ethernet switch *2 x 100/1000BaseSFP slots + 8 x 10/100/1000BaseT(X) ports *18~72 VDC redundant power inputs *IP40 protection level |
| Carat55-D4GF8GTIP-D3 | *Industrial DIN-rail L2 managed Profinet Ethernet switch *4 x 100/1000BaseSFP slots + 8 x 10/100/1000BaseT(X) ports *18~72 VDC redundant power inputs *IP40 protection level |
| Carat55-D4GF16GTIP-D3 | *Industrial DIN-rail L2 managed Profinet Ethernet switch *4 x 100/1000BaseSFP slots + 16 x 10/100/1000BaseT(X) ports *18~72 VDC redundant power inputs *IP40 protection level |
| Carat55-D12GT2GSC20D3IP-D2 | *Industrial DIN-rail L2 managed Profinet Ethernet switch *12 x 10/100/1000BaseT(X) ports + 2 x 100/1000 Base optical slots(SC singlemode dual fibre, 1310nm, 20km) *18~36 VDC redundant power inputs *IP40 protection level |