Carat55-D6TX2SC20D3-D2
6 x 10/100Base-T(X) ports, 2 x 100M SC optical ports
Front view
Side view
Side view
Label view
Back view
Top view
Supports 18~36VDC redundant power input with relay alarm output
High-strength aluminum alloy sealed housing, shock and vibration resistant- Fanless industrial dust-proof design
Supports AutoSniffer device management software for intelligent industrial network management
Overview
The Carat55-D6TX2SC20D3-D2 managed DIN-Rail Layer 2 industrial Ethernet switch is designed for network communication in industrial fields such as smart city, new energy, intelligent transportation and industrial automation. It complies with EN60950, EN55032 and other industry standards, and has obtained CE, FCC and other certifications. It is suitable for industrial field environments with stringent requirements, providing highly reliable industrial network connection solutions for various industrial application sites.
The Carat55-D6TX2SC20D3-D2 adopts store-and-forward switching mode, providing 6 x 10/100Base-T(X) ports and 2 x 100M optical ports (SC single-mode dual fiber, 1310nm, 20km).
The Carat55-D6TX2SC20D3-D2 supports CLI, Telnet, SNMP, SSH, and Web-based network management, as well as Layer 2 switching features including VLAN, IGMP Snooping, LACP, and QoS.
Technical Parameters
| Standards Compliance | |||
|---|---|---|---|
| Standard | IEEE 802.3i(10Base-T) IEEE 802.3u(100Base-TX) IEEE 802.3ad (Link Aggregation) IEEE 802.3x (Flow Control) IEEE 802.1p (Priority) IEEE 802.1Q(VLAN) | ||
| Switching Properties | |||
| Switching Characteristics | Store and Forward | ||
| Switching Capacity | 20Gbps | ||
| Packet Forwarding Rate | 0.892Mpps | ||
| Cache Capacity | 4.1Mbit | ||
| MAC Address Table | 8K | ||
| Switching delay | <10μs | ||
| Port Performance | |||
| Electrical Ports | 6 x 10/100Base-T(X) ports, auto flow control, full/half duplex mode, MDI/MDI-X adaptive | ||
| Optical Port | 2 x 100M optical ports (SC single-mode dual fiber, 1310nm, 20km) | ||
| Management Port | 1 x Console port (RS-232), RJ45 | ||
| LED Indicators | System (SYS), Power (P1, P2), Port (Link/ACT) | ||
| Key Features | |||
| VLAN | Supports IEEE 802.1Q VLAN | ||
| Reliability | Supports STP, RSTP, MSTP, MRP Supports LACP load balancing Supports G.8032 ERPS ring protocol Supports loopback detection | ||
| Security | Supports port rate limiting Supports bps and pps storm control | ||
| Multicast | Supports IGMP v1/v2 Snooping and IGMP Fast Leave | ||
| QoS | Supports ACL-based flow, VLAN ID, CoS, DSCP Supports DSCP, CoS/802.1p priority, Supports 8 queues per port Supports SP, WRR queue scheduling | ||
| ACL | Supports IP ACL based on source/destination IP, IP protocol type, IP precedence, TCP/UDP source and destination port numbers Supports MAC ACL based on source/destination MAC, VLAN ID, CoS Supports IP+MAC combined ACL | ||
| Management | Supports CLI Supports IPv4 HTTP Supports IPv4 FTP/TFTP Supports IPv4 SNTP/NTP Supports IPv4 SSH Supports IPv4 Syslog Supports SNMPv1/v2c/v3 Supports MIB interface, Trap Supports dual image Supports LLDP | ||
| Mechanical | |||
| Dimensions | 53mm x 125mm x 135mm (W x D x H) | ||
| Weight | 750g | ||
| Mounting | DIN-Rail, optional wall-mount | ||
| Other | IP40 protection, corrugated high-strength aluminum enclosure | ||
| Electrical | |||
| Input Voltage | 24VDC (18~36VDC) redundant power input, overload and reverse polarity protection, 6-pin 5.08mm pitch terminal block (relay occupies 2 pins) | ||
| Alarm Port | 1-channel relay alarm output, terminal block | ||
| Wattage | <6.5W | ||
| Environmental | |||
| Operating Temperature | -40℃~75℃ | ||
| Storage Temperature | -40℃~85℃ | ||
| Relative Humidity | 5%~95% (non-condensing) | ||
| Certifications | |||
| System Certification | ISO9001,ISO14001,ISO22163(IRIS) | ||
| Product Certification | CE, FCC, Telecom Equipment Network Access License | ||
| Safety | Compliant with EN60950, UL508 | ||
| EMC | EMI | FCC CFR47 Part 15B Class A, CE EN55032 Class A | |
| EMS | ESD | EN61000-4-2 | |
| RS | EN61000-4-3 | ||
| EFT | EN61000-4-4 | ||
| Surge | EN61000-4-5 | ||
| CS | EN61000-4-6 | ||
| PFMF | EN61000-4-8 | ||
| Vibration | Compliant with IEC 60068-2-6 | ||
| Shock | Compliant with IEC 60068-2-27 | ||
| Free Fall | Compliant with IEC 60068-2-32 | ||
| MTBF | MTBF > 500,000 hours | ||
Resources
Ordering Information
| Model | Description |
|---|---|
| Carat55-D6TX2SC20D3-D2 | DIN-Rail Layer 2 industrial Ethernet switch, 6 x 10/100Base-T(X) ports, 2 x 100M optical ports (SC single-mode dual fiber, 1310nm, 20km), 18~36VDC redundant power input, IP40 protection |