Managed Industrial Ethernet Switch
Carat55-D2GF8GT-D3
10-Port DIN-Rail Layer 2 Industrial Ethernet Switch
Front view
Side view
Side view
Label view
Back view
Top view
Features and Benefits
2 x gigabit SFP slots, 8 x 10/100/1000Base-T(X) ports- Supports 18~72VDC redundant power input with relay alarm output
high-strength aluminum alloy sealed housing structure shock resistant vibration,rugged and durable- industrial fanless dust-proof design stable and reliable,suitable for long-term operation Supports
AutoSniffer device management software for intelligent industrial network management
Overview
Carat55-D2GF8GT-D3 managed DIN-Rail Layer 2 industrial Ethernet switch is designed for network communication in industrial fields such as smart city, new energy, intelligent transportation and industrial automation. It is suitable for industrial field environments with stringent requirements, providing highly reliable industrial network connection solutions for various industrial application sites.
Carat55-D2GF8GT-D3 adopts store-and-forward Switching Characteristics,providing 8x10/100/1000Base-T(X) RJ45 ports and 2 x gigabit SFP slots.
Carat55-D2GF8GT-D3 Supports CLI, Telnet, SNMP, SSH, and Web-based network management; supports Layer 2 switching features including VLAN, IGMP Snooping, LACP, QoS.
Technical Parameters
| Standards Compliance | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | IEEE 802.3i(10Base-T) IEEE 802.3u(100Base-TX) IEEE 802.3ab(1000Base-T) IEEE 802.3z(1000Base-SX/LX) IEEE 802.3ad (Link Aggregation) IEEE 802.3x (Flow Control) IEEE 802.1p (Priority) IEEE 802.1Q(VLAN) IEEE 802.1d(STP) IEEE 802.1w(RSTP) |
||||||||||||||||
| Switching Properties | |||||||||||||||||
| Switching Characteristics | Store and Forward | ||||||||||||||||
| Switching Capacity | 20Gbps | ||||||||||||||||
| Packet Forwarding Rate | 14.88Mpps | ||||||||||||||||
| Cache Capacity | 4.1Mbit | ||||||||||||||||
| MAC Address Table | 8K | ||||||||||||||||
| Switching delay | <10μs | ||||||||||||||||
| Port Performance | |||||||||||||||||
| Electrical Ports | 8 x 10/100/1000Base-T(X) ports, auto flow control, full/half duplex mode, MDI/MDI-X adaptive | ||||||||||||||||
| Optical Port | 2 x gigabit SFP slots, LC | ||||||||||||||||
| Management Port | 1 x Console port (RS-232), RJ45 | ||||||||||||||||
| LED Indicators | System (SYS), Power (P1, P2), Port (Link/ACT) | ||||||||||||||||
| Key Features | |||||||||||||||||
| VLAN | Supports IEEE 802.1Q VLAN | ||||||||||||||||
| Reliability | Supports STP, RSTP, MSTP, MRP Supports LACP load balancing Supports G.8032 ERPS ring protocol Supports loopback detection |
||||||||||||||||
| Security | Supports port rate limiting Storm control (bps and pps) |
||||||||||||||||
| Multicast | Supports IGMP v1 / v2 snooping, IGMP Fast Leave | ||||||||||||||||
| QoS | Supports ACL-based flow, VLAN ID, CoS, DSCP Supports DSCP, CoS / 802.1p priority, 8 queues per port Supports SP, WRR queue scheduling |
||||||||||||||||
| ACL | Supports IP ACL based on source/destination IP, IP protocol type, IP precedence, TCP/UDP port numbers Supports MAC ACL based on source/destination MAC, VLAN ID, CoS Supports IP+MAC combined ACL |
||||||||||||||||
| Management | Supports CLI Supports IPv4 HTTP Supports IPv4 FTP/TFTP Supports IPv4 SNTP/NTP Supports IPv4 SSH Supports IPv4 syslog Supports SNMPv1 / v2c/v3 Supports MIB interface, Trap Supports dual image Supports LLDP |
||||||||||||||||
| Mechanical | |||||||||||||||||
| Dimensions | 61mm x 120mm x 147mm (W x D x H) | ||||||||||||||||
| Weight | 900g | ||||||||||||||||
| Mounting | DIN-Rail, optional wall-mount | ||||||||||||||||
| Other | IP40 protection, corrugated high-strength aluminum enclosure | ||||||||||||||||
| Electrical | |||||||||||||||||
| Input Voltage | 24VDC (18 ~ 72VDC) redundant power input, overload and reverse polarity protection, 6-pin 5.08mm pitch terminal block (relay occupies 2 pins) | ||||||||||||||||
| Alarm port | 1-channel relay alarm output, terminal block | ||||||||||||||||
| Wattage | <6.5W | ||||||||||||||||
| Environmental | |||||||||||||||||
| Operating Temperature | -40℃ ~ 75℃ | ||||||||||||||||
| Storage Temperature | -40℃ ~ 85℃ | ||||||||||||||||
| Relative Humidity | 5% ~ 95% (non-condensing) | ||||||||||||||||
| Certifications | |||||||||||||||||
| System Certification | ISO9001, ISO14001, ISO22163(IRIS) | ||||||||||||||||
| Product Certification | CE, FCC, Telecom Equipment Network Access License | ||||||||||||||||
| Safety | Compliant with EN60950, UL508 | ||||||||||||||||
| EMC |
|
||||||||||||||||
| Vibration | Compliant with IEC 60068-2-6 | ||||||||||||||||
| Shock | Compliant with IEC 60068-2-27 | ||||||||||||||||
| Free Fall | Compliant with IEC 60068-2-32 | ||||||||||||||||
| MTBF | MTBF > 500,000 hours | ||||||||||||||||
Resources
Ordering Information
| Model | Description |
|---|---|
| Carat55-D2GF8GT-D3 | DIN-Rail Layer 2 Industrial Ethernet Switch,2 gigabit SFP slots, 4 10/100/1000Base-T(X) ports,18-72VDCredundantpower input, protectionIP40 |
| Carat55-D2GF4GT-D3 | DIN-Rail Layer 2 industrial Ethernet switch, 2 gigabit SFP slots, 4 10/100/1000Base-T(X) ports, 18-72VDC redundant power input, IP40 protection |